BOND / CLASSIC
RT-01
Bond Profile Tile
The familiar stepped tile look. A versatile choice for residential and light commercial roofs.
Interlocking15° + pitchColour matched
Roofing Tiles / Stone Coated Metal
A roof surface built to outlast the weather.
Stone coated metal roof tiles combine the look of traditional roofing with the weight, strength and installation speed of profiled steel. Supplied with every matching trim, fastener and flashing.
0°Minimum roof pitch (indicative)
0Layer protective build-up
0Profile families available
0Matched accessory system
3PROTECTIVE LAYERS
Construction
What is inside every tile
A galvanised steel core is protected on both faces, then finished with a natural stone chip layer bonded in an acrylic overglaze. The result is a light, rigid panel that resists UV, impact, corrosion and noise from heavy rain.
- Galvanised steel substrate with protective back coat
- Acrylic-bonded stone chip finish for UV and colour stability
- Interlocking profile with concealed fixings
- Light weight reduces the load on the roof structure
Profiles
Choose the profile
All profiles share the same coating system and the same accessory range. Colour charts and samples are available on request.
BOND / CLASSICSHINGLE
RT-02
Shingle Profile Tile
A flat, low-relief slate appearance for contemporary architecture.
Flat layLow reliefClean lines
ROMAN / BARREL
RT-03
Roman Profile Tile
Rounded barrel courses for Mediterranean and hospitality projects.
Curved courseHigh reliefDeep shadow
Technical data
Roofing tile specifications
Typical values for the standard range. Project-specific data sheets are issued with every quotation.
| Parameter | Typical value / option |
|---|---|
| Material | Stone coated galvanised steel sheet |
| Substrate thickness | 0.35 mm / 0.40 mm / 0.45 mm / 0.50 mm options |
| Surface finish | Natural stone chips with acrylic overglaze |
| Minimum roof pitch | 15° (lower pitches require a fully supported deck — ask our engineers) |
| Fixing | Concealed interlock with matched screws into steel or timber battens |
| Colours | Standard range plus project colour matching |
| Matching parts | Ridge cap, hip cap, valley tray, barge cover, apron flashing, closures, screws |
| Packaging | Export pallet, labelled by roof zone for staged installation |
* Indicative values for illustration. Confirm the current certified data sheet, test reports and project-specific requirements with the QB Roof engineering team before specification or order.
Why specify it
Built for long service
Lightweight
Low dead load compared with concrete or clay tile, reducing the steel or timber required below.
Weather resistant
Multi-layer coating protects against UV, salt air, corrosion and driving rain.
Fast to install
Large-format interlocking panels with a single fixing grid cut installation time on site.
Complete trims
Ridge, hip, valley and flashing parts are profiled to the exact tile shape.
In detail
Tile, trim & finish
SurfaceStone coated roof tile installation
DetailMatched ridge, hip and flashing accessories
SectionProtective layer build-up
SupplyQB Roof manufacturing and packing
ProjectsCompleted roof application
Need a colour chart or samples?
Tell us the roof area and pitch — we will recommend a profile, fixings schedule and matching accessory list.
Explore the range